Autodesk revit 2018 bim management template and family creation free.Follow the Author
Looking for:
The Myth of a Perfect Revit Template | Autodesk University |
Revit Families: A Step-By-Step Introduction | Autodesk University.
- Autodesk Revit BIM Management: Template and Family Creation | ASCENT
To create a loadable family, you select a family template, and then name and save the family file. Name the family so it adequately describes the element that it is intended to create. Later, when the family is complete and you load it into a project, the family name displays in the Project Browser and the Type Selector. You can save families to any local or network location. To create a family with a template. Depending on the current drawing units, the New Family - Select Template File dialog displays the available imperial or metric family templates that are installed in a subfolder of this location:.
Rrevit template preview image manatement in the upper right corner of the dialog. The new family opens in the Family Editor. For most families, 2 or more dashed green lines display.
These are reference planes, or the working planes that you will use when you create the family geometry. If you are creating a host-based family, host geometry may also display. The family views vary depending on the type of family autodesk revit 2018 bim management template and family creation free you create.
If necessary, you can create additional views by duplicating and renaming existing views. Click File manayement Save As Aurodesk. Note: Do not autodesk revit 2018 bim management template and family creation free the family to a location where others can access it until you complete and test the family.
Click File tab New Family. Expert pdf to word converter free Depending on your software installation or office standards, the family templates may be installed in another location, either locally or on a network.
Contact your CAD Manager for more information. Note: Temmplate title case for the family name. Parent topic: Creating Loadable Families.
Autodesk revit 2018 bim management template and family creation free.Autodesk Revit 2018 Content
Download your eBook to your mobile phone or tablet and open it in the free VitalSource Bookshelf app. Please Note: Dual monitors, tablet, or separate reader device is recommended to facilitate use of the eBook with the software throughout the course. License code restrictions prevent multi-user access or use on networks. Instructor Tools are sold separately from the Student Guide and eBook.
The Instructor Tools for this training guide are delivered in a downloadable PDF document and contain answers to questions throughout the guide, timing suggestions for delivering the course, and instructor presentation files that complement the guide. Buy On E-Store or. Unlike system families, they are completely customizable by the end user in the family editor.
However, an in-place family is created directly within a project not in a separate family file as component families are and it cannot be exported to other projects. Further, you can create in-place versions of many system family categories like walls, roofs and floors. This capability allows the creation of custom or free-form shapes not otherwise possible in pre-defined system families. You should only consider creating an in-place family for elements that are unique to a particular project with little possibility that you will ever want to reuse them in future projects.
In-place families therefore prove effective for modeling unique existing conditions or very specialized and unique design scenarios. However, wherever possible, consider if the item you wish to create can be built using either predefined system elements or a component family first before resorting to an in-place family.
Often creating an in-place element seems like a good idea at the time only to later be the source of regret. We will not be exploring in-place families in this article. Here is a brief summary of Revit for Architecture critical terminology. The illustration is borrowed from the online help file a few releases back. There is a different version in the current help system, but I prefer this illustration as I believe it still does the best job of summarizing all of the various kinds of elements in the Revit environment.
There are several kinds of elements. Each represents something fundamental to your project. Elements in italic can be created and edited in the family editor. Can be freestanding or require a host. Views conform to the characteristics of typical architectural drawing types like plan, section, elevation and schedule. Some View Element families allow customization of Types, many do not. These are used establish project context, limits, extents and the like.
Datum Elements provide guidelines and limits for other elements within a project and can also include annotative qualities. The families and types of datum elements cannot be edited. View-specific elements do not appear in any other views automatically. If you wish to repeat view-specific items in other views, you can copy and paste them. Detail elements appear only in the view in which they are added. Detail Elements remain their actual size as created and do not adjust scale with the view.
These items are view-specific appearing only in the view in which they are added and are used to notate, embellish, describe and document design intent within a Revit Architecture project. Annotation elements maintain a constant size relative to the plotting scale of the view in order to maintain a constant size relative the sheet on which they are placed.
Text and Dimensions cannot. Many of the branches in the diagram contain both system and component families. Naturally for a discussion on the family editor, we are therefore limited to considering only the non-system families.
This includes all items on the Component Elements model branch, Detail Item families on the Detail Elements branch, Loaded Tags on the Annotation Elements branch and a few other miscellaneous elements as well like titleblock families or view tags and level head symbols.
The first step to working in Revit in general and building families in specific is to become comfortable with this list of terms. Keep it handy as reference as you continue. But before you embark on the process of building family content, it should be noted that there are many families included with the software and many more resources available online. A quick search in Google will turn up hundreds of sites containing tips, tricks and downloadable content.
Do take the time to explore the out-of-the-box offerings and some of many available sites as well if you have not already done so. As has been noted, you cannot create or delete system families. All system families will already be in your project file. To add types that are not present to a system family, you either have to duplicate an existing type, rename and modify it, or import one from another project.
To import from another project, you can use Transfer Project Standards Manage tab or copy and paste. To use a component family from outside the project in your current project, you can load it from a family file RFA or copy and paste from another project.
To load a family file, use the Load Family button on the Insert tab of the ribbon, or the contextual ribbon tab when a command is active. This lets you load a door family and place it all in the same procedure. Also, on the Insert tab of the ribbon, on the Autodesk Seek panel, you can run a search from directly in Revit of the online Autodesk Seek website. You can also type seek. In many cases, a family similar to the one you wish to create will already exist somewhere in the product or online in one of the myriad online resources.
Most companies also maintain their own libraries of office standard content on their internal servers. Practical wisdom says that it makes more sense to begin with something in the library and either use it as-is, or modify it to suit your needs.
Typically, this will be easier than starting from scratch. In your day-to-day work when you are up against deadlines, this is by far the best approach. If you are new to creating families in Revit, then I recommend that you create your first few families from scratch. By building the entire family yourself, you will learn more than simply modifying one.
Furthermore, families can include very complex parameters and constraints that often link to one another in a chained and sometimes complex or even convoluted fashion. Even for seasoned family content authors, it can be difficult to dissect these often complex relationships. Therefore, to avoid becoming discouraged, it is recommended that you start with a small simple example and work your way to more complexity over time.
These are more complex than they at first seem. Begin with something small, simple and boxy: like a simple piece of furniture or equipment. The basic process for creating a family is as follows: decide what type of family you need. This will include deciding what it should look like, how much detail to include and whether the graphics or level of detail should change in different views. You can start by sketching out yes on paper the family you intend to create and make notes about its requirements.
Next, create a new family file from the appropriate template or open an existing family file similar to the one you wish to create and save as. The choice of family template is important. The templates included with the software are provided by Autodesk with the product. Each contains basic settings, behaviors and in many cases some simple geometry or reference planes. The geometry included like a sample length of wall is only for reference and does not get inserted with the family when used in a project.
While it is possible to change the category of family after creation, it is best to choose wisely at the start. Try to choose the most appropriate category selecting: Generic Model.
Unlike category, the hosting behavior of a family file cannot be changed after it is created. So if you are not certain that you want the family you are creating to require a Host, it is safer to build it without one.
In other words, if you choose Casework wall based. If you think you might like to use the cabinet as a freestanding piece of casework, choose the Casework. You can always use the Align tool to move the non-hosted cabinet to a wall face later. You cannot later decide to detach the hosted casework item from its host wall. Once you have decided what you want to build and created a new family file based on an existing file or the appropriate new template, you are ready to create your family reference planes, parameters and geometry.
It is usually best to start with the framework. Then in both existing and new families, add the Reference Planes you will need. Reference planes provide the skeleton for your family. Some templates already contain basic reference planes. You can use these as-is or modify them. The proper procedure is to manipulate or create reference planes, optionally constrain or assign parameters to these planes, and then create geometry and lock it to the reference planes.
In this way, the reference planes actually drive the geometry. This is the most reliable, best-practice way to build your family files. To flex the model, simply try different values for each parameter and then apply. If the framework moves the way you expect, everything is good. Otherwise, undo, and try to fix the problem.
We will see several examples below. When all geometry and parameters have been created, applied and flexed, you are ready to save the file and load it into a test project below I use the Sandbox. If necessary, return to the family editor to make any adjustments and then reload, otherwise your family file is complete.
In its simplest form, a family can be a static graphic or symbol. Such a family would be drawn the way it was intended to look regardless of the circumstance. The out-of-the-box Chair-Breuer is one such example. There are no types or user-editable dimensions in this family. However, one of the things that make families so powerful is their ability to use variables to help them conform to varying circumstances.
This is done using constraints and parameters. While each of these terms has several possible meanings, in the context of Revit the following definitions are suitable to our discussion. On the other hand, if you want to allow the same door family to have varying flexible sizes for height and width of the vision panel, these would be parameters.
By making vision panel width and height parameters and using them to drive the geometry within the family, the user can exercise much greater control than would otherwise be possible.
Comments
Post a Comment